Alto Pro TS310 Powered Speaker 10'' 1100W Active

The all-new Alto Professional TS3 Series of professional loudspeakers deliver solutions for every
performance and installation challenge. With 2000 watts of explosive bi-amplified power and
newly-designed transducers, these speaker systems deliver truly high-performance audio, without
compromise or restriction. Their elegant industrial design, lightweight but rugged construction,
versatile mounting/placement application and intuitive user interface achieves a level of excellence
and refinement that exceeds expectations.

Specs

2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
10-inch (254 mm) LF driver, 2.5-inch (63.5 mm) high-temperature voice coil
1.5-inch (38 mm) voice coil, neodymium magnet HF driver, with precision wave guide
High quality, lightweight, cabinet design for easy transport, set up and installation
Pole-mountable, wedge monitor, bracket installation or flown application with integral
M10 suspension points
Integrated 2-channel mixer with dual XLR 1⁄4-inch combo mic/line inputs, independent level
controls, XLR Link output, Contour EQ switch and Ground-Lift switch
Custom engineered high-efficiency class D amplifiers with passive cooling design – No fan
means the speaker runs cleaner, quieter and has greater long-term reliability
Design Origin: Designed and tuned in the USA

Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver: 10-inch (254 mm) LF driver, 2.5-inch (63.5 mm) high-temperature voice coil
HF Driver: 1.5-inch (38 mm) voice coil, neodymium magnet HF driver, with precision waveguide
Crossover: 2.5 kHz
Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response: 54–20 kHz (+/- 3 dB)
Frequency Range: 48 Hz–22 kHz (-10 dB)
Horn Coverage: 90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors: (2) XLR/TRS 1⁄4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators: 2 x Power LED (front and rear), Clip limiter LED
Protection: Electronic clip, Thermal and transducer overdrive protection
Power Connection: IEC with Mains Fuse
AC Voltage Input: 100,110–120,220–240 V, 50/60 Hz
Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket,
Flown application with integral M10 suspension points, Wedge monitor
Dimensions (WxDxH): 12.8” x 12.0” x 20.8” / 323 x 305 x 527 mm
Net Weight: 26.08 lbs. / 11.83 kg.
Design Origin: Designed and tuned in the USA
Accessories: TSB810 Bracket, TS210 Cover

Delivery to UK mainland addresses* is FREE for orders of £75.00 or above. A small charge will be made for orders under this amount.

For full details regarding our delivery system, visit our Delivery Information page.

 Full details regarding our returns policy, visit our Returns Information page.

All your personal and credit card details are taken via our secure server so they are encrypted to stop fraud or abuse of your details. For more information on how we handle your personal details, please see our Privacy Policy