Part Exchanges Welcome! – Email Your Details To Find Out More
This piano is available for order and can be viewed in our piano gallery at our Bolton store.
We offer a wide range of finance packages, which means that owning one of these stunning pianos couldn`t be simpler! Simply contact us for full details and we will be happy to provide a quote. We also offer a comprehensive range of tuning packages to meet your personal requirements, carried out my our fully qualified piano tuner, and again can provide details on request.
Full details of the Model K:
Back Frame: Solid birch mortised foot-piece. Solid birch soundboard lining. Grand-type maple laminated closing rim; unequaled vertical strength and stability.
POSTS: 5 FULL-LENGTH tapered solid spruce with a volume of 3,600 cu. in. (58,993cm3); Assures that backframe will remain straight, promoting stable and consistent tuning. Strategically positioned with bottom ends tenoned into birch foot-piece for positive vertical alignment. Spruce fill-blocks between posts at top of backframe capped with solid birch backing board for positive horizontal alignment.
Hexagrip patented design; 7 laminations of quartered hardrock maple stock. Grain symmetrically distributed at successive angles of 45, 90, employing grain direction uniformly around the circumference of the tuning pin to provide the ultimate in pin grippage. As a result of this exclusive design, the tuning pin has smoother movement under torque, a more uniform retaining action for solid setting, and a piano will hold its tuning longer.
Created like the soundboard of violins to give a free and even response throughout the entire scale, it is so constructed as to be 8 mm thick in the center and tapered to 5 mm as it approaches the rim and outer case before being DOUBLE CROWNED. This design permits complete freedom of movement, while acting as a homogenous unit to displace a greater amount of air, thereby creating a richer and more lasting tonal response. Close-grained, quarter-sawn Sitka spruce, a wood having unusual stability and vibrance under stress and vibration, is used exclusively for the soundboard.
Made from durable, resinous sugar pine to assure strong and constant support of string down-bearing on the soundboard. Rib ends are hand-fitted into their mounting surfaces virtually locking in the important soundboard crown.
Treble: Hard rock maple vertical laminations capped with solid hard rock maple; planed to prescribed height, graphite coated, drilled, and notched by hand for precise individual string bearing. Design defies splitting. Bass: Rock maple base cantilevered at angle for maximum resistance to string pressure. Maple doweled, glued and screwed to soundboard.
Overstrung; twenty-six note bass/tenor break. Treble duplex. Tension: 37,500 lbs. (16,875 kg)
Sturdy gray iron; filled, CNC-milled, and sealed; bronzed and lacquered.
Premium blued steel with rust-resistant, nickeled heads.
Treble: Ten whole & one-half sizes from high-tensile Swedish steel. Bass: Swedish steel core wire wound with pure copper. Longest, pressure bar/bridge: 46 3/8" (118 cm)
Premium wool top felt over premium wool under felt; treated to resist insects and moisture. Compression-wired to retain permanent shape. Hard rock maple hammer moldings and shanks.
Vertical-cut premium wool for effective dampening. Hornbeam heads for endurance.
White, quarter-sawn hornbeam parts are bushed with specially treated wool action cloth for freedom from friction. Parts are anchored in hard maple rails. Dependable, Direct-Blow design permits ALL parts of the action to lie above the brass capstan screws.
European spruce, individually weighed-off. Chip-proof, stain-resistant coverings for naturals; slip-proof, delicately abraded ebonized sharps. Tough, durable Linden wood buttons reinforce keys over balance rail permitting maximum tonal power with every strike. Longest: 16 1/8" (40.9 cm)
Made from planks of stable, quarter-sawn poplar. Horizontal planks are freely mortised together, while their ends are permanently mortised into vertical planks made of birch, presenting a vented system for humidity escapement while allowing for necessary expansion and contraction. Hand-milled to be flat and true correlating with keyframe for snug fit. Strong, rugged construction provides a solid mount for keyframe and action allowing for precise and prolonged action regulation. Thickness: 1 3/4" (4.45cm)
Heavy, solid brass. Soft, sustaining, and full sostenuto.
52" (132 cm)
60 3/4" (154 cm)
26 3/8" (67 cm)
600 pounds (273 kg)
Free delivery for orders over £75 **
In Stock Products
Products which are in stock will be delivered on a next working day service when ordered before 2pm*. This excludes some larger pianos which may require specialist 2 person home installation. This service usually takes no longer than 14 days to complete.
Pre order products
Products which are available to order, but are not in stock. When you purchase a pre order product we reserve stock for you from the next available incoming shipment. We will regularly update you via email with up to date lead times.
Home Installation Piano Deliveries
When you purchase a piano which we supply with home installation we place the piano in a room of your choice **, we will get in touch once we have received your order to arrange the delivery. Home installations are usually completed within 14 days of the order but often sooner if the item is in stock.
For full details regarding our delivery system, visit our Delivery Information page.
Full details regarding our returns policy, visit our Returns Information page.
*Please note we are unable to offer 100% guarantee of next working day delivery. 99% of deliveries are made within that time, but there are situations where items may experience a delay. We are unable to offer compensation should this be the case.
** Additional charges may apply if your access is not ground floor and straightforward.
This product has not been reviewed yet.